OCZ DDR2 PC2-6400 CL 3 FlexXLC Edition 2GB Kit
Published: 25th August 2007 | Source: OCZ Technology | Price: |
The following information has been taken directly from OCZ Technology's website:
|800 Mhz DDR2|
|Available in 2GB (2x1024MB) Dual Channel Kits|
|OCZ Lifetime Warranty|
|2.1 Volts (2.4 Volts)*|
|240 Pin DIMM|
|2 x 1/4" ID (inner diameter) barbs |
|2.35V EVP*** |
2GB (2x1024) D/C Kit PN - OCZ2FX800C32GK
In this day and age it's great to see manufacturers like OCZ optimising their RAM for particular chipsets, and the OCZ DDR2 PC2-6400 CL 3 FlexXLC Edition sticks are no different. This 2Gb kit is in fact optimised for NVIDIA® nForce® SLI™ platforms. The way that OCZ achieved this was through their new EPP-Ready (Enhanced Performance Profiles) memory modules. Essentially, the module actually has two programmed speeds; one when run on an NVIDIA® nForce® SLI™ based motherboard (nforce 680i) and another for other boards based on competing chipsets.
Like their faster siblings, the OCZ DDR2 PC2-6400 CL 3 FlexXLC Edition modules feature E.V.P (Extended Voltage Protection) allowing you to run the RAM at 2.35v without voiding your warranty.
I'm sure that you'll all agree that the XLC heatsinks look extremely eye-catching and would look fitting in any high-end rig. I must also say that the weight of these modules is nothing short of 'hefty' to say the least, and they ooze quality. I have included an image below as a comparison to the OCZ OCZ PC2-6400 Titanium 2Gb DC Kit review that I did a few months ago, just so you can see the size difference between the two.
I was unable to remove the heatsink from the OCZ DDR2 PC2-6400 CL 3 FlexXLC Edition modules to give you a glimpse of the IC's on the PCB beneath, but I did try.
Now that we've gotten closer acquainted with our review subject, let's see how well they perform.