MSI X58 Platinum Motherboard

Memory Benchmarks



SiSoftware Sandra (the System ANalyser, Diagnostic and Reporting Assistant) is an information & diagnostic utility capable of benchmarking the performance of individual components inside a PC. Each of the benchmarks below were run a total of five times with the highest and lowest scores being discarded and an average being calculated from the remaining three.







Everest is in many ways similar to Sisoft Sandra. Focusing mainly on software and hardware information reporting, Everest also comes with a benchmark utility suitable for testing the read, write and latency performance of the memory subsystem. Each of these benchmarks were performed a total of 5 times with the highest and lowest scores being discarded and an average calculated from the remaining three.
  
 
 



 
 
Results Analysis

Again there was nothing to divide the two X58 contenders with Sisoft Sandra; but Everest preferred the Asus board's higher bandwidth and lower latency.

Let's see how the boards perform in our next set of benchmarks...
«Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 Next»

Most Recent Comments

22-12-2008, 14:03:06

monkey7
Very good review, was a good read

1.44V for 3.85gHz Now I'm even more proud of my UD5 doing [email protected] Did you adjust the VTT voltage too? It's just as important as vCore.Quote

22-12-2008, 15:28:53

Rastalovich
Great review. Think they're still crazy priced tho.

Hopefully they see some sense l8r in the 09.

Don't have much exerience with MSI mobos, but I am surprized there's no SLI.Quote

22-12-2008, 17:28:48

Bungral
Quality review as always Rich. Bit miffed at lack of SLI seeing as it's such a massive selling point. Puts it at an instant disadvantage. Ah well.Quote

23-12-2008, 05:56:36

fruityness
Couple of features I picked up on which I thought were great; the first being the right angled sata plugs.. Such a simple thing! But would make tidy cabling easy - it's just impossible to make the sata cableslook neat if they are sicking up out of the mobo.The other was the bios save feature, thats pretty cool! And a great feature, being able to swop from "warp speed overclock" to "mr easy going day to day" at the press of a button.. 10/10 for that one.

£240 though? Too much I think.. Needs to come with the kitchen sink at that price, and it doesnt.

A fine review.Quote

23-12-2008, 07:46:32

w3bbo
Quote:
Originally Posted by name='monkey7'
Very good review, was a good read

1.44V for 3.85gHz Now I'm even more proud of my UD5 doing [email protected] Did you adjust the VTT voltage too? It's just as important as vCore.
I got 4.2ghz on the UD5 I'm currently testing. The MSI was a different beast all together .

Quote:
Originally Posted by name='Rastalovich'
Great review. Think they're still crazy priced tho.

Hopefully they see some sense l8r in the 09.

Don't have much exerience with MSI mobos, but I am surprized there's no SLI.
Yeah, me too. The boards have to go to Nvidia for 'approval' after which SLI can be endorsed. I believe Nvidia are charging a fortune for this endorsement.

Quote:
Originally Posted by name='Bungral'
Quality review as always Rich. Bit miffed at lack of SLI seeing as it's such a massive selling point. Puts it at an instant disadvantage. Ah well.
Yup, I agree totally m8. It wouldn't be so much of an issue if the board were priced much lower to compensate but at present it is not.

Quote:
Originally Posted by name='fruityness'
Couple of features I picked up on which I thought were great; the first being the right angled sata plugs.. Such a simple thing! But would make tidy cabling easy - it's just impossible to make the sata cableslook neat if they are sicking up out of the mobo.The other was the bios save feature, thats pretty cool! And a great feature, being able to swop from "warp speed overclock" to "mr easy going day to day" at the press of a button.. 10/10 for that one.

£240 though? Too much I think.. Needs to come with the kitchen sink at that price, and it doesnt.

A fine review.
Thanks for the feedback and I agree on all points.Quote
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.