Asus E35M1-M PRO Micro ATX

Under The Hood...

Asus E35M1-M PRO Micro ATX

Under The Hood...

First of all I would like to point out that Asus does bundle an 80mm cooler with this motherboard. Concerning? We'll soon find out when we place the system under heavy load...

Asus E35M1-M PRO Micro ATX      Asus E35M1-M PRO Micro ATX

Oops, I accidently stripped the motherboard of its cooling solution. I suppose we have no choice but to have a look.

Asus E35M1-M PRO Micro ATX      Asus E35M1-M PRO Micro ATX

Beneath the aluminium finned cooler lies the Fusion E350 APU and the Hudson M1 Southbridge. We were particularly impressed by the level of integration inside the APU. Don't forget, inside that die lies a dual core processor, a memory controller and 80 Stream Processing units.

Finally let us walk you through our testbed specifications before we show you the BIOS and get testing.


AMD Fusion E350 APU
Asus E35M1-M PRO Motherboard
G.Skill Flare RAM @ DDR3-1333 7-7-7-20
XFX Radeon HD 5670 1GB GDDR5
Samsung Spinpoint F1 320GB Hard Disk Drive
BeQuiet Dark Power Pro 750W PSU

Let's get cracking shall we?

«Prev 1 2 3 4 5 6 7 8 9 10 11 Next»

Most Recent Comments

03-02-2011, 06:05:58

AMD Fusion seems like the perfect choice for a HTPC, a few questions, is this capable of 3D? Also does it upscale well?Quote

03-02-2011, 07:10:40

Hi Zeals,

As the new HD 6310 GPU supports UVD 3.0, this means that DivX decoding is now included (on top of the existing MPEG2/H.264) and also Blu-Ray 3D support. However neither Asus or AMD have clearly stated that the HD 6310 will decode 3D well. I suppose this will become more clear as time goes on however my initial impressions are that a HTPC for higher end functionality such as 3D support or anything else that may command some more CPU horse power is probably better off with a conventional CPU and dedicated GPU.

I hope that helpsQuote

03-02-2011, 07:37:40

Thnx for the fast reply Mul, really appreciate it.Quote

03-02-2011, 10:54:14

will my NHD14 fit ?Quote

03-02-2011, 12:33:59

Originally Posted by wotevajjjj View Post

will my NHD14 fit ?
Go for it bro!

Pros: you'll have the coolest running 18W CPU on the block. WooHoo! Bragging rights.

Cons: You'll probably need to work on the mount - I don't see the usual AM3 hardware on that board. And do you figure £150 or more on a full-tower case to accommodate the Noctua is about right for a rig like this? An HAF-X or a Lanboy Air would be quite stylish.


Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.