Phanteks Enthoo Pro M Case Review
Published: 31st July 2015 | Source: Phanteks | Price: 59.99 @ OCUK |
Any tower type CPU cooler up to a height of 194 mm will fit just fine into the M, certainly the NZXT one we use to help you guys gauge space between cases appears almost lost in there.
Also looking a bit lost is the 240mm rad we use. We think these pictures show quite well just how much room there is in the front of this case. As mentioned on the last page, there's a good 100mm of clearance on offer here.
A pull out 360/280mm rad mount on a £60 case??? Surely not. Not bad Phanteks, not bad at all. It certainly makes mounting things up here a whole lot easier that's for sure, and with the multiple slots you'll be able to position your rad just where you want it.
With the drawer pushed all the way back in we can see that there's more than ample clearance between it and the RAM. In fact there's a just under 70mm of clearance which should be enough for even the tallest RAM heatsinks. As you can see in the images below there's absolutely stacks of room, and as it's unlikely that there's going to be anything on you mobo higher than 70mm in this area provided your rad clears your RAM you should be good al the way down as far as your CPU socket edge. Just remember to leave yourself enough room to fit the water block and plumb everything in.