Phanteks Enthoo Luxe Tempered Glass Review

Stripped

Phanteks Enthoo Luxe Tempered Review

Stripped

We've taken the roof vent panel and the front panel off, as they are a non tool removal.  As we said earlier, there are very few plastic parts to the Luxe so apart from what we've done aside from the slide of fan filers in the base and front panel there's nothing else to remove.  We should note that one of the more interesting features of the Luxe is that for the greater part it's held together with screws, and not rivets.  This means that should the mood take you, it's much more modder friendly.  For example, the top cover frame as you see it above can be removed.  OK, it's going to take 15 screws to do so (which is why we haven't) but if you want to, you can.  

Phanteks Enthoo Luxe Tempered Review  

 

Removing the front shows us the twin 140mm fans that come installed as standard on the Luxe.  As you can see, there are also mounts for 120mm fans or a single whopping 200mm fan


Phanteks Enthoo Luxe Tempered Review  

 

 With the top air vent removed we get our first peek into the area that's touted (in the instructions at least, although not the website), as being able to house a 420mm rad.  It certainly looks big enough, and remember, that bundled fan is a 140, not a 120mm unit.

Phanteks Enthoo Luxe Tempered Review  

 

 


Phanteks Enthoo Luxe Tempered Review  

«Prev 1 2 3 4 5 6 7 8 Next»

Most Recent Comments

20-02-2017, 15:01:02

Surpuppa
This case was great a few years ago when it first came out, but it is starting to show its age now.Quote

20-02-2017, 16:50:12

AngryGoldfish
Quote:
Originally Posted by Surpuppa View Post
This case was great a few years ago when it first came out, but it is starting to show its age now.
I do agree that it has aged, but I also think there is more to it than that. It's an old case and has old features; therefore it is outdated. That is the mindset we have. It is more about how we perceive the case than any provable realities. The proof is this is still a great case, irrelevant of whether it has three 5.25" bays. A lot of people initially did some fantastic builds in it, but sadly it has been sidelined for newer models, ones that will likely be considered 'outdated' in five years time. That Corsair 460X that TTL just built into that's all the rave right now, I reckon it will be rarely spoken about in a few years time. The only cases that might stand the test of time are the ones that are a blank canvas, such as the Fractal Define S. It's basically just an empty box. In-Win's designs are a novelty at the moment; I don't think they'll be nearly as popular five years from now. Case Labs have remained popular for so many years because they are just plain boxes of various dimensions.Quote

20-02-2017, 17:04:06

tolagarf
Well it turned out to be the perfect case for me. It had really all I needed which is 5.25" drive bays for my bay reservoir, plastic drive cages that don't rattle and cause vibrations into the rest of the case as my Fractal Define R5 completely failed in that regard. On top of that it has room for a 420mm radiator in the top compartment, which is a rare feature in cases and the tempered glass edition is very beautiful done and an added bonus for me.

Not all cases have to be ITX these days and smaller than a Coke can Quote

21-02-2017, 09:15:56

Peace
Funny that you mentioned the typo when this review actually was (by far) the article with the most typos I've ever come across

I still like an optical drive bay for when you really have to burn a CD, because your car has no USB or Bluetooth, or when you have no internet and need to install your drivers after a fresh install and the list goes on.

For the 3.5" cages, I'm with you. I still have 3 seperate drives in my PC mainly because I'm not buying new ones, but if I'd do so, I'd get a 1 or 2TB, so no need for that much space.

Other than that, I like the case, one day I wanna build a PC with such a big case


Nice review, but you should proof read them as well :P SCNRQuote

23-02-2017, 06:19:54

Deadtroopers
As soon as the typo was mentioned and almost immediately followed by a typo I knew we would probably be getting deliberate typos on every page. I don't think I have seen anyone use the word anterior on the internet before, I can't recall reading it on the printed page more than a couple of times in half a century either. Cleverly written I thought.

CoolerMaster are Maker mad at t' moment but Phanteks have had this 'take it all apart, rearrange, or ditch' thing going on almost from their first case out of the gate. So you think all these drive bays/mounts are Old Hat? You don't have to keep them or you can re-purpose them, the choice is yours!

I'm not actually all that keen on this particular case but this review puts it up a few notches in my estimation, bringing out features that other reviewers failed to make me aware of. Good one!Quote
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.