Inwin 703 Review
Up Close: Interior Overview
The interior of the 703 is finished in the same slightly textured Matt Black as the exterior, and it's only here where we start to see the odd hint that this is an entry level case. By no means do we mean there's a lack of quality, far from it, build quality is more than decent. What we mean is that the small motherboard tray and non grommeted management holes indicate that savings have been made here in order to keep the price down. That said, you still get a decent CPU cut out, a front mounted 120mm and a rear mounted red LED 120mm fan.
Although there are three 5.25" bays, the case actually only has an external blank for one drive. Still at least it's quick release. The other two bays are detailed as internal 5.25" bays!
Lower down there's a rack of four bays able to accept either 3.5" or 2.5" drives. The bays are of the drawer type and benefit from rubber isolation fixings. This lower bay is riveted to the floor and front of the case so cannot be easily removed.
There's plenty of ventilation in the base with space for a 120mm fan and also a large mount for your PSU. The PSU mount does not have any rubber isolation feet, instead using a tight fit full length tray to help reduce transmitted vibration and noise.
The rear of the case sports seven vented PCI slot covers, which as we previously mentioned are tabbed to the case itself, meaning that once removed they cannot be re-attached. Inwin have also included a rather nice looking clear framed and bladed Red LED fan.