Corsair H110i GT Review
Up Close: The Cold plate and pump assembly.
The cold plate exterior is constructed from dense plastic and sports a brushed Aluminium effect central section imprinted with the Corsair name and sail logo. Aside from the tubing there are quite a few power, monitoring and control connections to the pump, These include a SATA type power connection, two PWM fan power leads, a fan speed monitoring cable and a mini USB input for connection via the included cable to the motherboard header that enables interaction and control via the link software.
The cold plate has two 90 degree rotary fittings which are again protected from kinking by a tight wound spiral. The rotaries are on the stiff side but can be moved to any position you will require with a bit of persuasion. The large copper contact plate comes with a coating of TIM pre applied. This coating is protected by a plastic cap in transit, and will of course be removed by us and replaced with our usual Noctua TIM to ensure continuity of testing