Cooler Master Hyper 612 v2 Review


CoolerMaster Hyper 612 v2 Review


Cooler Master supply all the brackets and fittings you'll need for a whole host of AMD and Intel CPUs.  Whichever you go for the process is essentially the same. Following the selection of the universal back plate and appropriate brackets (we're not using one as we're socket 2011), the first job is to screw in the clamping bracket stand offs.  Following that the clamping brackets are slipped over the top.

CoolerMaster Hyper 612 v2 Review     CoolerMaster Hyper 612 v2 Review


The clamping brackets are then tightened down with nuts to provide a solid platform for the cross plate which lives inside the lower section of the cooler.  Having hooked one side to the clip under the left hand clamping bracket the opposite side is screwed down tight to the opposite bracket, using a system not too dissimilar to the tried and tested AMD stock cooler method.

CoolerMaster Hyper 612 v2 Review     CoolerMaster Hyper 612 v2 Review


Although not a huge cooler by any means the 612 v2 certainly makes its presence known inside its spiritual home, the Cooler Master "Test Trooper"

CoolerMaster Hyper 612 v2 Review     CoolerMaster Hyper 612 v2 Review


The overhang at the rear of the cooler means that we've got no problems using it with the dual RAM banks on the socket 2011 motherboard.

CoolerMaster Hyper 612 v2 Review     CoolerMaster Hyper 612 v2 Review  

«Prev 1 2 3 4 5 6 Next»

Most Recent Comments


Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.