G.Skill Trident DDR3-2500 4GB Review

AIDA64

G.Skill Trident DDR3-2500 4GB Review

A couple of things to note about the graphs. Firstly although both the HyperX and Trident are at their XMP, the G.Skill is rated at 363 MHz faster. The 'Tweak' version of the HyperX is pretty much the same as the XMP settings for the Trident, so really the main comparison is between the two middle bars. The orange bar is for the 2400MHz CAS 8 settings, which should see reasonably similar results.

AIDA 64

Memory Benchmarks

Read tests are pretty nice in which the reduction down to CAS8 at the expense of barely any clock speed really pays dividends over the default G.Skill. The Write test is almost linear with clock speed, apart from the HyperX stealing quite a march on the rest. Yet once we move to the Copy test, which should be a nice balance between read and write, it all settles down with the G.Skill at XMP settings just holding a slender lead.

Memory Latency

When the discussion is held between those who believe low CAS is more important and those who feel speed is king, we generally have seen in recent times that speed just about wins out. Because we've hardly lost any speed to obtain our CAS8 rating on the tweaked G.Skill then all three kits in the 2400MHz area give very similar results.

«Prev 1 2 3 4 5 6 7 Next»

Most Recent Comments

03-12-2010, 07:17:07

tinytomlogan
Memory speeds are rapidly increasing in the eternal power war. Today we look at the latest offering from G.Skill.

Continue Reading

03-12-2010, 07:35:53

F-alienware
Excellent stuff. Good ram this is

Great read as always

03-12-2010, 17:29:53

Jamzieth
Looks good but i think i'll stick with my Mushkin XD

03-12-2010, 17:35:06

Aurus_OC
Great read as always! Correct me if I am wrong but it looks like sadly the heatsink won't fit under the NH-D14. So probably going to stick with the Mushkin in the end.

11-02-2011, 07:16:51

RJ1D
adding another 6gb 2 kit ram on an already installed 6gb 2 kit ram wont effect the existing performance?
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.