Corsair Vengeance LP 8GB 1.35v Review
PC Mark Vantage
Published: 5th September 2011 | Source: Corsair | Price: £49.86 |
PC Mark Vantage
Finally Futuremarks PC Mark Vantage. In the Memory test suite the Vengeance LP once again can hold its head up high, being very much on a par with the other 1600MHz kits but for .3v less. Impressive stuff.
Most Recent Comments
WOW that is low v
impressive memory kit.
That is a really nice looking ram with good performance to boot
Very cool indeed. 1.35 v is truly awesome. If I upgrade my cooler, these are on the top of my list as I can only fit a few coolers because of the large heat spreaders on the vengeance ram I'm currently using.
my blue ones came today 
wow not what i expected.....i figured their next kit would be the corsair devastator or maybe the corsair obliviator.... complete with 26cm carbon nano-tube heatsinks.....
i feel so cheated........
i feel so cheated........
I do feel the urge to get some of that memory, unfortunately I already did invest in some memory for my rig 
Nice review as always!
Nice review as always!
Yeah im impressed with this memory kit.
Very nice :]
Awesome stuff good review TTL, been keeping an eye on these for a little while, prices vary slightly but you can get the 1.5v coloured LP kits for around £44-£46 off the usual online sites which advertise on OC3D such as Aria/Scan. Thinking of getting these for my x58 board seen a picture of six white sticks in a Gigabyte board looks awesome.
Wow some tasteful looking ram corsair normally make horrid looking ram and decent price thats pretty cool.
Quote:
|
Originally Posted by Montysaurus
Awesome stuff good review TTL, been keeping an eye on these for a little while, prices vary slightly but you can get the 1.5v coloured LP kits for around £44-£46 off the usual online sites which advertise on OC3D such as Aria/Scan. Thinking of getting these for my x58 board seen a picture of six white sticks in a Gigabyte board looks awesome. |
A near perfect score, 9-10-10. Going to be so much easier to source than G.Skill Ecos.
Anyone know how this scales against the Mushkin Blackline 8GB DDR3-1600 ULV CL9 kit (996988) which is also 1.35V and only slightly more expensive (where I live anyway )
Nice to see more producers are working with options in coulor
)Nice to see more producers are working with options in coulor
They're finally available here in Canada from anywhere between $90 - $100 per 8GB kit. I wonder if they're really worth investing in? They do look cool though even if you don't OC them. 
I wonder if they have any motherboard compatibility problems? I'm guessing with Sandy Bridge, even the most budget boards should be able to support these memory modules.
I wonder if they have any motherboard compatibility problems? I'm guessing with Sandy Bridge, even the most budget boards should be able to support these memory modules.
I cannot get my system prime stable with these running anything lower than 9-9-9-24. Not a complain, but expected them to get close to your 7-8-7-24 with 1.65V. However, if I set 8-8-8-24, prime crashes in first two runs (rounding error) and if I try to go 7-8-7-24, system wouldn't boot at all, or get BSOD's. A bit disappointed, although for my gaming there will be minimal benefit of tighter timings i reckon.
http://www.scan.co.uk/products/16gb-...9-9-24-xmp-15v
are these the same as reviewed? as cannot find mention of 1.35v anywhere.
if they are scan have an awesome price for a 16Gb kit of the cerulean blue
are these the same as reviewed? as cannot find mention of 1.35v anywhere.
if they are scan have an awesome price for a 16Gb kit of the cerulean blue
Quote:
|
Originally Posted by VengeanceUK
http://www.scan.co.uk/products/16gb-...9-9-24-xmp-15v are these the same as reviewed? as cannot find mention of 1.35v anywhere. if they are scan have an awesome price for a 16Gb kit of the cerulean blue |
http://www.scan.co.uk/products/8gb-%...-9-9-9-24-135v
from the looks of it.. looks like nanya.. yuck
4gb density modules don't have the best timings/overclockability, but corsair's lower end and even alot of their medium range dimms aren't the best clockers.
hynix bfr used in some 4gb density are probably going to be the best case scenario... 9-11-9 2133 usually some lower bin are 9-11-10
For low voltage.. i'd love to see some kingston lovo reviews
4gb density modules don't have the best timings/overclockability, but corsair's lower end and even alot of their medium range dimms aren't the best clockers.
hynix bfr used in some 4gb density are probably going to be the best case scenario... 9-11-9 2133 usually some lower bin are 9-11-10
For low voltage.. i'd love to see some kingston lovo reviews
Quote:
|
Originally Posted by badatgames18
from the looks of it.. looks like nanya.. yuck 4gb density modules don't have the best timings/overclockability, but corsair's lower end and even alot of their medium range dimms aren't the best clockers. hynix bfr used in some 4gb density are probably going to be the best case scenario... 9-11-9 2133 usually some lower bin are 9-11-10 For low voltage.. i'd love to see some kingston lovo reviews |
Quote:
|
Originally Posted by tinytomlogan
We've done LoVo if you look |
didn't know you already reviewed it a while back
i think the lovo you reviewed might have been mnh-e hyper/(the 1866 model).. EOL
anyways sorry for the off topic..
great reviews
CSS Valid
Continue Reading