ASUS GTX750 Ti Review

Overclocking, Temperatures and 'Extreme' Tests

ASUS GTX750Ti Review

Overclock

We have an entirely new experience with the ASUS GTX750Ti. With no voltage tweaking at all we could push the ASUS GPU Tweak software to the stops and the card just merrily kept on ticking along. In fact it overclocked so well that we discovered a firmware limit to the overclock, which is why we haven't put the results into our regular graphs. 

However, take a look at the GPUz and the GPU Boost 2.0 speed that we attained thanks to the awesome cooler. Remember that this is without any voltage tweaking at all, 1350MHz on the Maxwell GM104 core. Insanity.

ASUS GTX750Ti Review    ASUS GTX750Ti Review   

Temperatures

10°C cooler than the reference design, and absolutely silent. Everything we could wish for in a cooler to be honest.

ASUS GTX750Ti Review

Overclock Benefits

As we said the card 'Boosted' to a good enough speed that, coupled to the manual overclocking limits we encountered, mean that we're awaiting a potential fix before unleashing the card in our battery of benchmarks. Nonetheless there is clearly a LOT of extra performance hiding under the hood of the ASUS GTX750Ti.  

ASUS GTX750Ti Review  

«Prev 1 2 3 4 5 6 7 8 9 10 11 12 Next»

Most Recent Comments

07-03-2014, 07:04:03

tinytomlogan
http://www.overclock3d.net/gfx/artic...184940184l.jpg

Following the recent launch of the Maxwell architecture on the GTX750Ti, we take a look at the first partner card from ASUS.


Continue Reading

07-03-2014, 08:25:49

SieB
Not bad for a lower end card.
I think there is a typo in the AVP graph for the Club3D 7950 Royal King though.

EDIT: No typo, just seems the 7950 royal king got worse performance than all the other 7950s in AVP for some reason. The HIS 7950 got 78fps for example.

07-03-2014, 09:11:33

Zoot
Regarding the strange placement of the power connector, if you look at the PCB, you'll notice the GPU is towards the back of the card and power delivery circuitry is near the power connector.

If they wanted to place the power connector where it normally is, it would have meant running metal tracks almost the full length of the PCB carrying a reasonable amount of current which wouldn't be a good idea really.

07-03-2014, 17:18:40

Conchubair
That you reached a firmware limit in the overclock is interesting. I hope they will change this in a later update if its not a core restriction. IF thats the case right across the board for Maxwell cards then it could be an exciting time for GFX card overclocking
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.