ASUS Maximus V Formula ThunderFX Review
PC Mark
Published: 8th August 2012 | Source: ASUS | Price: £268 |
PC Mark Vantage
The fully rounded test that is PC Mark Vantage shows some strange results, with the Productivity score being particularly poor, which affects the overall score, especially when compared to it's bigger brother. The memory and gaming scores are right on a par, it's just a shame that the average of our three runs didn't yield a more positive Productivity score.
PC Mark 7
Things flip completely around in the more modern PC Mark 7, with the Formula being right up there with stock settings, and the overclocked result only just shaded by the Maximus V Extreme and MSI GD65.
Most Recent Comments
I don't really like the barbs and the heatsink design in general.
same here, the heatsinks have that rubbery look/texture but other than that great board 
Yea, why can't they just make some 1/4 threads, and close it with some plugs with the top in the same material as the heatsinks :/
Quote:
|
Originally Posted by Ciric
Yea, why can't they just make some 1/4 threads, and close it with some plugs with the top in the same material as the heatsinks :/
|
I don't think it looks that bad at all. And maybe you could just get the dremel out and cut it off? That would ruin the watercooling possibilities on that heatsink though.
I've been considering this board for a future IB build. However, of all the reviews I've seen there's been no mention of the barb size on the built in water blocks. I agree that it would have been heaps easier to just have put 1/4" threads in instead of permanent barbs. However, my entire system uses 1/2" barbs with 7/16" tubing. It may technically work if I got a couple of 3/8" barbs/adapters, but it just wouldn't be right. If you get what I mean. I'm assuming since there's been no mention, and from the looks of it, that they are 3/8" barbs. So that will probably be a deal killer.
I have the same board, but on top of the board against the cooling block and a little bit right of the 2 fan connectors, are 3 pins, do you know what they are for, cause I can't find them in the user guide.
Thx
Thx
A very good review with an honest conclusion. Well done Mr Waters.
Judging on last few reviews of Z77 I think MSI G65 is the best deal and hopefully it will end up in my new build.
Kind regards to everyone btw from a new member
Judging on last few reviews of Z77 I think MSI G65 is the best deal and hopefully it will end up in my new build.
Kind regards to everyone btw from a new member
I'm most likely buying this motherboard but with out the thunderbolt thing.
The only reason I'm getting it is to use more tubing XD
The only reason I'm getting it is to use more tubing XD
Hi All,
I have this board and the barb size is 3/8, which can also be found in the PDF version on the motherboards manual
Cracking board btw
I have this board and the barb size is 3/8, which can also be found in the PDF version on the motherboards manual
Cracking board btw
CSS Valid
The second in our look at the Maximus V motherboards comes in the form of the Formula ThunderFX.
Continue Reading