Antec 1900 Gaming Case Review

Introduction

Antec Nineteen Hundred Review

Introduction

As well as the increasing trend for SFF cases there does seem to be a compensatory, or perhaps conflicting, pull in the opposite direction with manufacturers unleashing ever larger enclosures on the unsuspecting public.  At 676mm high, the new Nineteen Hundred from Antec is one such case.  We have to admit to being quite excited when the Nineteen Hundred arrived as such large cases with long roofs and high front panels usually bring with them opportunities for large rad native water cooling and perhaps second build compartments.  A quick look at the spec sheet below will show you that the case is able to accept the large motherboards, along with tall CPU coolers, long GPUs and prolific storage.  We seem to be off to a good start then so let's dig in and see what treasures the Nineteen Hundred reveals to us.

 

Technical Specification

 Model Nineteen Hundred
 Dimensions 696x223.6x555mm (HxWxD)
 Form Factor Super Mid Tower
 Colours Black with Green or Red mesh trim
 motherboard Support SSI CEB, E-ATX, ATX, M-ATX, M-ITX
 Expansion Slots 9
 Storage

 3x5.25"

 12x3.5"

 2x2.5"

 Cooling

 Front:  3x120mm

 Rear:  1x120mm

 Roof:  2x120mm

 Internal 2x120mm (optional)

 Water Cooling Roof:  240mm radiator support
 Max GPU 330mm (13")
 Max CPU Cooler 175mm (6.8")
 PSU 2xStandard ATX
 Front I/O4xUSB3.0, 2xUSB2.0, Audio In/Out
«Prev 1 2 3 4 5 6 Next»

Most Recent Comments

10-02-2014, 10:46:15

tinytomlogan
http://www.overclock3d.net/gfx/artic...054546465l.png

Such a big enclosure brings such great promise. Let's see if the Nineteen Hundred from Antec has it where it counts.


Continue Reading

10-02-2014, 11:02:47

barnsley
Oh I was right about this being the case that you were going to "talk" about. Can't watch the review (no sound at work, I'll watch it later) but I've read it through and I agree, its like a 900D from 2002-2006. Its a shame about the build quality being nothing special, as the cases I've used by them in the past have all been surprisingly well built, albeit lacking in the ol' cable management department. I do like the exterior (mainly because I like the enermax case it looks suspiciously alot like) but it costs too much for what it is. Poor show antec, you could've done much better . Their Gx700 is an underrated case, this however, is not.

10-02-2014, 11:15:53

Dicehunter
I was actually looking forward to getting this and the green mesh option really caught my eye but after reading the review and watching the vid I think I'll stick with my 540.

This case would of been great in the early 2000's.

10-02-2014, 11:19:09

barnsley
Quote:
Originally Posted by Dicehunter View Post
I was actually looking forward to getting this and the green mesh option really caught my eye but after reading the review and watching the vid I think I'll stick with my 540.

This case would of been great in the early 2000's.
Would have been a good (albeit) expensive introduction to modding though :P.

10-02-2014, 11:28:31

Dicehunter
Quote:
Originally Posted by barnsley View Post
Would have been a good (albeit) expensive introduction to modding though :P.
Indeed, Although it seems to me that the designers were smoking crack when they built this thing because it's a massive pile of horse crap, Looks so cheap and nasty.

10-02-2014, 11:29:15

mercator
Quote:
In a world where removable modular drive bays are common place it's also baffling to understand why Antec have chosen to rivet there's in place.
It's "theirs" instead of "there's".
Quote:
Here at OC3D we strive to be subjective in all things regardless of our personal preferences and our likes and dislikes.
Quote:
What we have is a subjective review of a case that could have and should have been great but fell well short of the mark.
I think the proper word is "objective", not "subjective".
Nice review though.

10-02-2014, 11:32:49

barnsley
Quote:
Originally Posted by Dicehunter View Post
Indeed, Although it seems to me that the designers were smoking crack when they built this thing because it's a massive pile of horse crap, Looks so cheap and nasty.
I'm guessing it'll be one of those case that look better/worse in the flesh. Its how most of antec's stuff is really.

10-02-2014, 11:34:21

tinytomlogan
Quote:
Originally Posted by Dicehunter View Post
Indeed, Although it seems to me that the designers were smoking crack when they built this thing because it's a massive pile of horse crap, Looks so cheap and nasty.
It could have been awesome - just such bad use of the space and massively lacking in options / features.

10-02-2014, 11:37:18

SieB
This case is godawfull, 235 for this? The only thing it has going for it is size, that is literally the only thing this case has to offer. So many cases for much cheaper or slightly more that offer so much more, that are actually well built and not flimsy pieces of crap.

Antec, pls.

10-02-2014, 11:43:47

QuietOne
That bit where you constantly repeated yourself bout the switch and the lower side panel made me laugh. Great award too.

10-02-2014, 11:44:32

barnsley
I'm saying this should have been 120 at most. Heck probably less, maybe around 90? That way it'd only have that inwin case to compete with.

10-02-2014, 11:58:59

Morley
Shockingly bad, I'd much rather have the Enthoo Primo over this case! The Primo being 20 cheaper!

10-02-2014, 12:00:19

Dicehunter
When I heard the price of 230 I almost blew out a kidney, This case should be at the very most 100.

10-02-2014, 12:00:34

SieB
Quote:
Originally Posted by Morley View Post
Shockingly bad, I'd much rather have the Enthoo Primo over this case! The Primo being 20 cheaper!
40 cheaper if you get it from Scan

http://www.scan.co.uk/products/phant...tx-atx-w-o-psu

10-02-2014, 12:01:47

Morley
Quote:
Originally Posted by SieB View Post
Not if you want the white edition :P lol

10-02-2014, 12:04:34

SieB
Quote:
Originally Posted by Morley View Post
Not if you want the white edition :P lol
Fair enough Either way, it's hell of a lot better priced and offers a hell of a lot more whilst being much better built and still being cheaper.

10-02-2014, 12:05:37

Conchubair
Quote:
Originally Posted by QuietOne View Post
Great award too.
the cat is worth more than the case..

10-02-2014, 12:13:49

Morley
Quote:
Originally Posted by SieB View Post
Fair enough Either way, it's hell of a lot better priced and offers a hell of a lot more whilst being much better built and still being cheaper.
I agree 100% not sure what Antec was thinking of....

Still the video is worth a watch just to see TTL smack the hell outta the case! lol

10-02-2014, 12:26:05

barnsley
Quote:
Originally Posted by Conchubair View Post
the cat is worth more than the case..
The cat is probably worth more than OC3D and almost every other tech site put together :S.

10-02-2014, 12:27:49

QuietOne
Quote:
Originally Posted by barnsley View Post
The cat is probably worth more than OC3D and almost every other tech site put together :S.
The reason barnsley said that is because that cat is his brother

10-02-2014, 12:31:07

Conchubair
Quote:
Originally Posted by barnsley View Post
The cat is probably worth more than OC3D and almost every other tech site put together :S.
As a dog person and a redditor (sick of them /r/aww posts) im going to disagree..

But ffs Tom, I nigh on pissed myself at 7.35.......

10-02-2014, 12:32:17

barnsley
Quote:
Originally Posted by QuietOne View Post
The reason barnsley said that is because that cat is his brother
shush, how else am I going to afford a new PC?

I'm waiting for the 1900 2. It'll probably have all the insides reworked I'd hope.

-edit- I'm a tortoise person personally.

10-02-2014, 12:37:17

cooperman
Antec should of called it the 'the money pit'

http://i.imgur.com/pIdhmQp.jpg

10-02-2014, 14:00:13

Dicehunter
Quote:
Originally Posted by tinytomlogan View Post
It could have been awesome - just such bad use of the space and massively lacking in options / features.
I can see a lot of potential in the case but only if they spent a bit longer in the design offices.

I can see this case becoming like herpes, No one wants it but everyone's gonna get it at some point in their life

10-02-2014, 14:53:00

Edge
Quote:
Originally Posted by mercator View Post

Quote:
Here at OC3D we strive to be subjective in all things regardless of our personal preferences and our likes and dislikes.
I think the proper word is "objective", not "subjective"
I must admit I got a little giggle out of reading 'subjective' in the review xD

10-02-2014, 15:02:57

Trylen
The last case Antec did I liked and thought was innovative was the Tonka coloured Lanboy Air, however that was some time ago. Last one I purchased was a Super Lanboy. Since then, I've been using Coolermaster cases and I thought they were restrictive without a drill and cutting tool.
This case from Antec is purely a storage server build, that's it. Put a work station board in with a raid card or multi-port SATA/SAS card in, fill up with drives and make a NAS of it (good lord that sounded more like "an ass of it" in my head) tuck it away in a closest with power and be done with it.
Fan support and rad support are the main features on big cases these days and this is from a company that was once at the front (or close to) of the gaming case market so what happened?

One the other hand, Tom I love the new award!

10-02-2014, 15:06:45

Dicehunter
Quote:
Originally Posted by Trylen View Post
The last case Antec did I liked and thought was innovative was the Tonka coloured Lanboy Air, however that was some time ago. Last one I purchased was a Super Lanboy. Since then, I've been using Coolermaster cases and I thought they were restrictive without a drill and cutting tool.
This case from Antec is purely a storage server build, that's it. Put a work station board in with a raid card or multi-port SATA/SAS card in, fill up with drives and make a NAS of it (good lord that sounded more like "an ass of it" in my head) tuck it away in a closest with power and be done with it.
Fan support and rad support are the main features on big cases these days and this is from a company that was once at the front (or close to) of the gaming case market so what happened?

One the other hand, Tom I love the new award!
Very well said, I had an Antec 1200 when they first came out and I modded it and it was generally a pleasure to work with even without modding but this looks like they went back a few steps and to me anyway looks like it was never finished and was rushed out of the design offices.

I strongly think this has something to do with shareholders wanting more profit ergo shove an unfinished product out ahead of schedule, It's the only logical reason why they would release what appears to be a half arsed attempt.

10-02-2014, 15:32:26

maniac
I still wonder how antec still gives you review samples after all the "plasticy" and "tacky" comments you give their products.....

10-02-2014, 15:40:02

Edge
Quote:
Originally Posted by maniac View Post
I still wonder how antec still gives you review samples after all the "plasticy" and "tacky" comments you give their products.....
Would be even worse for them if OC3D publicly announced that Antec weren't confident enough in their products to send over a review unit.

10-02-2014, 16:03:08

murphy7801
So Antec not sending any more stuff lol

10-02-2014, 16:26:05

yassarikhan786
The build quality is terrible. WC support is horrendous.

Probably another couple of years before Tom gets another Antec case for review.

10-02-2014, 16:31:00

grassman
Wow what a shame, I happen to think she is quite the looker.

Ended up being a gall with large breast, big booty, Beautiful face. But unfortunately also comes with Brown crooked teeth, bad gas and a bad attitude. Maybe or maybe not a penis as well.

10-02-2014, 16:35:51

Lonestar166
Thanks for your brutally honest review TTL. I was right, the TOTALSHITE award.

10-02-2014, 16:41:52

murphy7801
Buy switch 810 its so much better and cheaper. Though to be fair ever since I started watching toms reviews he recommends have always been good when did buy them so he knows what he is talking about.

10-02-2014, 16:49:41

G-Dubs
Subjective? We do of course mean Objective. Write drunk, edit sober. Guess we should have waited longer in the morning.

The real shame is that for the sake of a little bit more thought this case could have been so much better.

10-02-2014, 16:52:00

dalewakelin
What happened to antec being a good quality brand? they have a lot of work to do.
http://www.dwindustries.tk/uploads/1...jpg?1392069062

10-02-2014, 17:12:10

Feronix
Quote:
Originally Posted by G-Dubs View Post
Subjective? We do of course mean Objective.
Dw, I get them mixed up all the time so I usually just settle for 'Sobjective'.

10-02-2014, 17:46:08

Conchubair
Quote:
Originally Posted by yassarikhan786 View Post
The build quality is terrible. WC support is horrendous.

Probably another couple of years before Tom gets another Antec case for review.
Maybe after those few years Antec will produce another case worth reviewing and buying..

10-02-2014, 21:33:43

Code-Red
I haven't built a rig since 2006, and even then this would be a terrible option at an obscene price. I used to think Antec was pretty good but if this is what their new stuff looks like it a huge letdown.

10-02-2014, 21:39:53

Dicehunter
Quote:
Originally Posted by Code-Red View Post
I haven't built a rig since 2006, and even then this would be a terrible option at an obscene price. I used to think Antec was pretty good but if this is what their new stuff looks like it a huge letdown.
Sort of the same boat as you but more so case wise as internals, I was totally in love my the "Silverstone Raven RV01" from February 2009 and no case won me over until I saw the 540 !

All I can say is, Go Corsair, The 540 is the first Corsair case I've owned and I usually don't go for "Cube" style cases but it fits everything in, You don't even need to try and make it look clean thanks to all the cable management/grommets it pretty much does it itself

If you want a new case, 540, It oozes with Quality, You will love it

10-02-2014, 22:22:30

paullongy326
well before we start and have a sneaky pop has when you post on forum lol lol look at that cable management get it sorted lolololol naaaa not for me looks cheap n tacky

10-02-2014, 23:27:09

Prathamesh Patil
I completely agree with you ttl. Very bad design from a good company. There is so much that could have been done with it.

10-02-2014, 23:59:17

SEBAR
When I first skimmed through the written review I was thinking that maybe you all where being overly critical on this case. The pics on the written review are the first pics I have seen of this case. Quality can be hard to judge with pictures alone and the case looked good in the pictures. Then I watched the video review and can appreciate what all the fuss is about. For me it is the little things that turn me off to this case. That flimsy top panel, the taped on rubber feet, and the side panel with the generic acrylic window. This is a case that was about half way through the design process. There really is no excuse for the oversights on this case.

The case does have some potential but as pointed out in the video, this is a modders case.

Great video and written review boys. OC3D is the best source for quality reviews and information.

11-02-2014, 00:13:58

Dicehunter
Quote:
Originally Posted by SEBAR View Post
This is a case that was about half way through the design process.
+1

I really think this is the problem, Someone wanted this case on the market way before it was ready

11-02-2014, 02:57:44

ShaunB-91
Watched this video before I went to sleep last night, I don't know if it was supposed to be but it was another funny one, the part near the beginning trying to close the lower section flaps. :')

For the case...erm, well the grumpy cat award seemed fitting, the front did look quite good although I wouldn't want it myself. I wasn't keen on the power and reset buttons either. The roof was just shocking that it could only fit up to 240mm with all that extra space around it. Even the top mesh panel just looked cheap and flimsy.

Internally it didn't look up to much either, as with the lower bay compartment, the drives might not generate much heat but I'd still feel safer if I knew there was at least some decent airflow passing over them.

11-02-2014, 04:40:43

barnsley
Quote:
Originally Posted by Dicehunter View Post
If you want a new case, 540, It oozes with Quality, You will love it
Yours might do . I hate to be a party pooper but I was distinctly unimpressed when I did a build with a 540 recently. The cable management looks amazing ( even with an idiot like me in charge of the build)but I think the build quality wasn't actually as good as everyone here lead me to believe. I'm going to rustle a few jimmies here, but I actually think my ugly as sin coolermaster case feels more solid.

11-02-2014, 05:01:24

Dicehunter
Quote:
Originally Posted by barnsley View Post
Yours might do . I hate to be a party pooper but I was distinctly unimpressed when I did a build with a 540 recently. The cable management looks amazing ( even with an idiot like me in charge of the build)but I think the build quality wasn't actually as good as everyone here lead me to believe. I'm going to rustle a few jimmies here, but I actually think my ugly as sin coolermaster case feels more solid.
That's the amazing thing about having your own mind, Free will and choice to choose what you like and not what someone else does

11-02-2014, 05:19:58

sheroo
I have owned a few Antec cases. They used to be innovative, although the cable management was woeful - so at least that has changed. The original P180 was very different when it first came out, and started the mainstream trend for quiet computing, and it kept my hot 478 Prescott system nice and quiet.

Since then other manufacturers have absorbed its features and provided better implementations, its a shame Antec haven't done the same...

11-02-2014, 05:21:06

ShaunB-91
What was that yellow and black one, was that the re-make of the lanboy? It was odd.

11-02-2014, 05:33:13

ahimoth
I feel sorry for Antec. One of the funniest reviews I've seen by Tom. I loved when he kept showing us how to close the sides.

11-02-2014, 05:34:48

barnsley
Quote:
Originally Posted by Dicehunter View Post
That's the amazing thing about having your own mind, Free will and choice to choose what you like and not what someone else does
More solid built, not a better choice I mean. The 540 is deffo a looker . Kinda reminds me of an old ferrari. Beautiful to look at but a bit fall-apart-y.

11-02-2014, 05:48:12

Dicehunter
Quote:
Originally Posted by barnsley View Post
More solid built, not a better choice I mean. The 540 is deffo a looker . Kinda reminds me of an old ferrari. Beautiful to look at but a bit fall-apart-y.
The only thing I'm not too keen on with the 540 is lack of a filter underneath the HDD, Apart from that IMO I cannot fault it

11-02-2014, 06:29:42

nuke
Just wondering if you heard back from Antec about this review? Hopefully they will see it as constructive criticism and not blacklist you.

11-02-2014, 06:37:06

tinytomlogan
Quote:
Originally Posted by nuke View Post
Just wondering if you heard back from Antec about this review? Hopefully they will see it as constructive criticism and not blacklist you.
Nothing yet really, might take a few days for them to formulate what they want to do. I think the general reaction from the video says it all though.

They need to make some changes and fast otherwise the only place they will be selling cases is maplins.

11-02-2014, 06:40:46

ShaunB-91
At the end of the day if you are going to make a product, why would you not look at the leading contenders in the market, in this case Corsair and NZXT, look at why people like them so much, what do they bring to the table thats good, useful, and innovative and then base your own product around that. This just seems like yeah, the designer of this doesn't give a monkeys about computers, so how he got the job I don't know and he's just done a crap job. Nobody will buy this.

11-02-2014, 06:43:32

Remmy
Quote:
Originally Posted by tinytomlogan View Post
They need to make some changes and fast otherwise the only place they will be selling cases is maplins.
Lol the ultimate put down in the industry

11-02-2014, 06:45:08

ShaunB-91
I forgot to say, the video sounds a bit echoey Tom, sounds like the office is still quiet empty.

Also, you should keep something down on the desks for your reviews whether flaps open or not, you don't want to scratch those new desks!

11-02-2014, 06:52:05

barnsley
Quote:
Originally Posted by Remmy View Post
Lol the ultimate put down in the industry
Shouldn't be though considering Corsair, Coolermaster and Zalman already do that .
Antec stuff is already sold in PC world though.

11-02-2014, 06:53:41

tinytomlogan
Quote:
Originally Posted by barnsley View Post
Antec stuff is already sold in PC world though.
Explains it all

11-02-2014, 07:00:04

barnsley
Quote:
Originally Posted by tinytomlogan View Post
Explains it all
Well it was last time I checked. I bought an antec psu from there 2 years ago.

Lol even Pc World don't stock antec stuff anymore. Its all corsair parts now.

11-02-2014, 07:08:08

tinytomlogan
Quote:
Originally Posted by barnsley View Post
Well it was last time I checked. I bought an antec psu from there 2 years ago.

Lol even Pc World don't stock antec stuff anymore. Its all corsair parts now.

Bold move - normally they sell the uber cheap stuff

11-02-2014, 07:43:07

barnsley
Quote:
Originally Posted by tinytomlogan View Post
Bold move - normally they sell the uber cheap stuff
Basically they wanted to start competing against system builders/vendors like scan for a while. In order to be taken seriously they got rid of all non major brand parts. also, the EU are making non 80+ psus illegal now from what I've heard.

11-02-2014, 09:06:20

Damien c
When I first saw this case I said it seemed, like Antec were trying to build a 900D competitor but failed, and after watching the review last night I have to say I am glad I never contemplated buying it.

Must not be easy tearing a product apart with very valid points when you rely on reviewing products to make a living, but I suppose someone has to be honest in reviews.

The build quality and options in this case just looks ridiculously poor.

Thank's for another great video and love the "Grumpy Cat" award.

11-02-2014, 09:27:24

garih
Quote:
Originally Posted by tinytomlogan View Post
Bold move - normally they sell the uber cheap stuff
last time i was in pcworld i noticed they had a reasonable range of mech keyboards, decent range of headsets. and even products like the h60..

11-02-2014, 09:35:01

ShaunB-91
Quote:
Originally Posted by garih View Post
last time i was in pcworld i noticed they had a reasonable range of mech keyboards, decent range of headsets. and even products like the h60..
I was in there a few weeks ago and nearly picked up the Corsair m65 mouse, I think it was 55. But I thought no just wait.

11-02-2014, 17:24:52

mihapiha
TTL you improved my day so much with the bottom side panel button.

"Awesome build-quality" indeed

11-02-2014, 17:27:59

Mysterae
The Antec 1900 A.D. design more like.

It's as if they designed it purposely not to be able to fit their competitors products in it. Perhaps that was the designers remit. Although it has the potential to be modded to hell and back, I think you'd get bored very quickly with it.

I do hope Antec take the messages from Tom in the spirit and purpose as they're intended. We need more nice cases!

11-02-2014, 18:23:04

dalewakelin
Its a nice case on the outside but on the inside it is very shaky

11-02-2014, 19:09:57

CrazyTeeka
Someone could always mod this case to fix the flaws?

11-02-2014, 19:12:14

Remmy
Quote:
Originally Posted by CrazyTeeka View Post
Someone could always mod this case to fix the flaws?
Yeah true, but for the price these things should come as standard to be honest. It's not good if you have to mod a case just for functions which you should expect anyway :/

11-02-2014, 19:53:33

Wraithguard
Quote:
Originally Posted by Remmy View Post
Yeah true, but for the price these things should come as standard to be honest. It's not good if you have to mod a case just for functions which you should expect anyway :/
Couldn't agree more! At 235 I expect it to at least have some of the competitions features and to be honest the build quality is a touch slap dash.

11-02-2014, 23:02:26

alpenwasser
Wow, what an utter waste of potential. It really does look like it's from the year
2000 or so (minus the painted interior maybe).

Leaving the horrendous build quality aside (a disqualifier by itself for a Caselabs
fetishist like me), how a case with this feature set (if one can call it that) can be
brought to market in 2014 really is a proper mind-boggler.

12-02-2014, 03:12:35

ShaunB-91
"And it came from the year 2000...fuck all has changed but its black inter-ior"

Say that in your head in the busted tune way.

12-02-2014, 04:50:51

CrazyTeeka
My biggest dislike would be the side panels that you have to slam shut.

I wonder if Antec actually thought "Lets make a cheap case in a modern look, and make it over 200, no one will notice, will they?".

Or their R&D team is seriously out of touch with what makes a good case.

Or they just don't care and just want your money.

12-02-2014, 06:41:57

Morgenmuffel
This one is Interresting for tryal and Error Modding...but really?? 200 bugs for that 900D liked-crap? Size does matter for me but THIS is not worth the Words "Case"...is a thing that is big but thats all.

Thumbs for the Grumpy Cat Award...liked

12-02-2014, 08:19:57

Kong
I think this vid may have set the record for the amount of F bombs has dropped in a review lol.

The construction looked terrible. How Antec has fallen. I agree that is could make a nice basic server build, but not for the price. I think this is going to get sales from uneducated people that has seen the Corsair 900D but run across this in a store.

I do like the outside shape of the case, and the red ring around the front. After that, glad I just picked up the Corsair case cheapish.

12-02-2014, 08:39:30

nick9999
I also like the front, but as enough people have already mentioned the build quality and the options are not that great.

I definatelly agree that it is too expensive for what it offers and I hope that Antec will improve.

I myself have an Antec One for my second PC and find it OK for a budget build, althought it is also very restrictive in the options it gives you, but to be fair there are also a couple of things which are really neat

By the way the grumpy cat award is simply awesome
But hopefully it wont need to be given out too often.

12-02-2014, 11:36:42

Chadwokie
watching this review...... made me soooooooo angry (my 1st case was a antec 900 and i loved it!)....... that being said that was like 5 years ago and this case doesnt look like its made any advances in design. I mean even the antec 900 had modular hdd bays!.........GRRRRRRRRRR and wtf at the use of space at the top and bottom of the case really makes me so frustrated with antec

13-02-2014, 01:03:28

Vicey
My first ever case for my own personal build was an Antec. That was like over a decade ago and it doesn't look like they've improved their build quality since then haha

13-02-2014, 18:30:51

Bartacus
My favorite part was when Tom was looking at the underside of the case, detailing the cheap feet, and I noticed the "QA PASS" sticker. I think Antec's QA department consists of 3 people: Stevie Wonder, Ray Charles, and Helen Keller.

13-02-2014, 22:52:44

jackjack
Antec nailed it again, Great case like it a lot!

14-02-2014, 02:23:47

sheroo
I had to glue the feet back on my P180 as well. Obviously they are still using this tried and tested method of fixing. Oh I forgot - the first door I got was warped as well - but give them their due Antec customer support were very good.

03-03-2014, 19:21:45

zangza
It looks like it has potential but needs a little work

03-03-2014, 20:40:20

Wraithguard
Needs a white interior, drive bay panelling and the exterior meshes need to be white. It has potential but it could (should) have been so much better from the start.

04-03-2014, 08:23:34

Squidlorock
Can't remember if i commented here, but i watched/read the review when you made it... i was shocked how bad it was! The door hinges (i was in stitches at that), the feet and when you thought couldn't get worse... the window!!!
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.