New range of external HDD enclosures from Enermax
""The best cooling external enclosure for your hard drive""
Published: 5th December 2007 | Source: Enermax |
Enermax, renowned manufacturer of power supply units, has expanded its portfolio of products with aluminium mobile and external hard disks-housings. The new Jazz enclosures unique full mesh design, ensures that any heat generated is quickly dissipated away from the HDD and cooler air is then free to flow back into the device which instantly cools and helps to lengthen the hard disk life. The enclosures were designed with the objective of extending the service life of hard disk drives by ensuring that the HDD is always kept at an optimum temperature. The extraordinary feature of the Jazz 3.5in is the easy installation of the hard disk without any tool, through three simple steps. Replace, Slide and Lock with a patented "Zero-Screw" lock system.
The 2.5 jazz's dimensions are (H) 17mm x (W) 78.3mm x (D) 138.8 and it weighs just 110g. Included in the box, is an extra usb power cable and a water resistant travel bag. The Dimensions for the 3.5 are (H) 43mm x (W) 124mm x (D) 220mm with a weight of 490g. Models are available for SATA I&II HDD and eSATA the range also features a Hi-Speed USB 2.0 connection. Included, is a vertical acrylic stand (3.5" version only) and 4 extra anti-slip rubber feet for horizontal and vertical setup. Unlike other external enclosures with a large power pack, the Jazz comes with a compact external adapter.
Discuss in our forums.
Most Recent Comments
Hi,
im trying to find a gigabyte motherboard for my build
the version i am after is Gigabyte GA-P35-DS3R but has to be a rev 2.0 board (no parrallel or serial port )
have contacted gigabyte support who says these boards should be hitting the retailers at the end of september, can anyone tell me tekheads will stock these any time soon?
also seems like there are rev 2 versions of other gigabyte boards coming out as well, again without the parrallel port and serial port, as tekheads dont show the revision of their boards will they update their pictures of these boards to reflect the rev difference as it may well upset a few customers if they order a board (picture shows rev 1 version) and end up with a rev 2 board (which looks different to the rev 1 board) and visa versa
Anyone?
could someone from tekheads comment as to if current stock is rev 1 or 2 and if there are any plans to stock the rev 2 ?
CSS Valid
im trying to find a gigabyte motherboard for my build
the version i am after is Gigabyte GA-P35-DS3R but has to be a rev 2.0 board (no parrallel or serial port )
have contacted gigabyte support who says these boards should be hitting the retailers at the end of september, can anyone tell me tekheads will stock these any time soon?
also seems like there are rev 2 versions of other gigabyte boards coming out as well, again without the parrallel port and serial port, as tekheads dont show the revision of their boards will they update their pictures of these boards to reflect the rev difference as it may well upset a few customers if they order a board (picture shows rev 1 version) and end up with a rev 2 board (which looks different to the rev 1 board) and visa versa