Coolermaster announce Fnatic vs Team Cooler Master Showmatch

"On May 14th, two rivals will take part in an epic head to head battle live on Gamesports.de allowing gaming enthusiasts across the world to watch via the live video stream."

Search News

  • Scrolling Image
Coolermaster announce Fnatic vs Team Cooler Master Showmatchshowmatch
 
On May 14th, two rivals will take part in an epic head to head battle live on Gamesports.de allowing gaming enthusiasts across the world to watch via live video stream. Organised by CM Storm, Coolermaster's new gaming division, Fnatic MSI and Team Coolermaster will embark on an arduous Call of Duty 4 Search and Destroy match, with the first team to reach 13 rounds winning the map. Three maps will be played and the first team to win two maps will be declared the Victor! The match will begin on Thursday at 20:00 CET, so make sure you are free to watch the clash of the titans.
 
To celebrate the event, a raffle will be held giving you the oppertunity to win some great hardware prizes including a CM Storm Scout case and  a Coolermaster V8 CPU Cooler. To be in with the chance of winning a prize, all you need to do is leave a comment in the news post on either Fnatic.com, Team-coolermaster.co.uk or the CM Storm Forum. The lucky winners will be contacted at some stage through the day via private message. You must reply to the private message the same day to claim your prize. If you should happen to ask a question in your comment, and it is considered worthy, it will be answered directly by the two teams in an interview after the match has finished.
 
Discuss in our Forums.
«Prev 1 Next»

Most Recent Comments

03-05-2009, 14:07:57

byestream
Can anyone advise?
Running the above graphics card from my HTPC with one DVI/HDMI output connection to my projector, I wish to connect the other DVI output to a mini monitor. The 4850 card has two set up resolutions which appear to be independent to each other, the projector is set up at 1920X1085 and the monitor is set at 848x400 resolutions , the problem is that the monitor only displays the windows scenic display without the icons???

03-05-2009, 14:42:58

!TIMMY!
You may be set to dual monitor instead of clone. I am not sure if you can have 2 different res on clone mode.

03-05-2009, 17:27:00

byestream
thanks for your response but with 'clone' its exactly what it means the resolution would be the same as main application in this instance the projector is 1920 x 1085 setting both (as I found out) to this resolution causes the monitor to display 'out of range' meaning of course that this resolution setting is beyond the monitor's capability and the monitor's display is distorted

regards.

03-05-2009, 18:55:50

Ham
Are the icons on the projector? If so just switch which one is your primary display. Either that or drag everything across...

24-07-2009, 16:25:53

lpmgpsjp

Can anyone advise?
Running the above graphics card from my HTPC with one DVI/HDMI output connection to my projector, I wish to connect the other DVI output to a mini monitor. The 4850 card has two set up resolutions which appear to be independent to each other, the projector is set up at 1920X1085 and the monitor is set at 848x400 resolutions , the problem is that the monitor only displays the windows scenic display without the icons???



hello guys, just new here and i need help which vga cooler will be sure to be compatible with my vga ati radeon hd 4850. i tried zalman and arctic cooling vga cooler as they said that compatible to hd4850 and both are failed. everytime i power up my pc, i can see on the screen memory dump message and shuts down my pc. later on, i observed that the original vga cooler of my vga card is having a small square about 1cm a bit higher from the main heat sink of the cooler on the part which is going to touch on the gpu in which the 2 vga cooler that i tried to use doesnt have. is it a possible problem? thanks a lot guys.

24-07-2009, 17:57:03

Ghosthud1
sorry too be harsh new guy but try not too thread bash and make your own :p
if your question is about cooling i suggest posting it here http://oldforums.overclock3d.net/forumdisplay.php?f=19
you will get a far better response compared too a thread titled completely different too your question
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.