Radeon HD 4870 Voltmods
"Our friends over at techPowerUp voltmod a 4870. "
Published: 10th July 2008 | Source: techPowerUp |
Radeon HD 4870 Voltmods
Yep, it has been minutes and someone has already come up with a voltmod for the 4870. The guys over at techPowerUp have found a way to voltmod all HD 4870s running on PCB #B50731-10.
GPU Voltmod - Soldering:
Memory Voltmod - Soldering:
Memory Voltmod - Pencil:
Disclaimer:
Performing these voltmods will void any and all warranties your video card may have.
You - and only you - are responsible for any damage caused indirectly (or directly) by these modifications.
Performing these voltmods will void any and all warranties your video card may have.
You - and only you - are responsible for any damage caused indirectly (or directly) by these modifications.
Discuss on our Forums.
Most Recent Comments
this is only the bios right? i mean, all the other asus software wont need to be for the rampage will it?
this is only the bios right? i mean, all the other asus software wont need to be for the rampage will it?
As said earlier the Maximus and the Rampage are almost the same. You can install the same chipset drivers, same RAID drivers and the same audio(if you use onboard).
Enjoy your Maximus 'Rampage' Formula :D
If you have any trouble either post here or MSN me.
is it stable? i wish i could do this with my p5nt-deluxe, dont know why i`m getting BSOD every 30 min when play games or watch movies(DEVICE_IRQ_NOT_LESS_OR_EQUAL) :( n-force 780i bonus:P
Right, I am sure some of you know that the Maximus and the Rampage are pactically the same board other than the chipset.
Well, people have shown by a quick flash of the bios that the x38 and x48 are very much the same chip.
I have just now flash my Maximus Formula with the lastest Rampage bios allowing me to get at some hidden features high FSB and a some how keep a lower voltage.
Guide can be found here. Scroll down a little.
Enjoy! :)
did this flash as well. The BIOS screen is like a plane's cocpit! Great board though
How about flashing my Rampage Formula with the Maximus BIOS? :D
Hi!
I'm in a bit of a dilemma here. I was going to buy the rampage formula, but I can get a cheap maximus formula for about 150€ and that’s a really good price for that MB. I need an fsb of about 500 and more for my e6750 to go over 4 GHz. Do you think I can go so far with the maximus and the rampage bios or should I go for the Rampage instead? And how hot does the x38 chip get when you compare it with the x48 is there a big difference?
Thx for your help
I'm in a bit of a dilemma here. I was going to buy the rampage formula, but I can get a cheap maximus formula for about 150€ and that’s a really good price for that MB. I need an fsb of about 500 and more for my e6750 to go over 4 GHz. Do you think I can go so far with the maximus and the rampage bios or should I go for the Rampage instead? And how hot does the x38 chip get when you compare it with the x48 is there a big difference?
Thx for your help
That maximus can easily get a FSB of 500Mhz with Dual cores.
I cannot guarantee but it is very very probable.
I cannot guarantee but it is very very probable.
That maximus can easily get a FSB of 500Mhz with Dual cores.
I cannot guarantee but it is very very probable.
It depends more on the cpu than the board :D
Thanks, guys for your quick reply.
I have another question, did you had any other issues with that MB since you’ we bought it?
Thx
I have another question, did you had any other issues with that MB since you’ we bought it?
Thx
Nope, the board is a dream to work with. Practically perfect in every way. ;)
CSS Valid