Nvidia Sign Sony Deal
"Nvidia Sign Sony Deal"
Published: 28th March 2006 | Source: N/A |
Rumours Abound on the web of a Big Deal between Nvidia and Sony.
It has been said that the deal is bigger than the PS3 deal by a significant amount.
Is this PS4?? Maybe a bit too early. But I would think its very possible that PSP2 is under development.
Perhaps even both.....
Discuss in our Forums
Most Recent Comments
Tec read the full thread. I have a tube cutter, this is for a copper slab, not a tube.
Plasma cutter would work wonders, problem is finding one... Take ur stuff around to local shops and see if they'd cut it for ya for cheap cheap.
I doubt whether this would be a viable solution, but you never know
http://www.emachineshop.com. Other avenues you may be able to try Nol; would be using a bandsaw or other mechanical saw fitted with a bimetallic blade suited to the cutting of copper alloys, or industrial engineering firms dealing with alloys use a number of tools to do it:
Shearing
Electrical discharge machining (EDM)
Laser cuttingWater jet cutting
Plasma cutting
Slitting
Guillotining
Abrasive disc cutting
http://www.emachineshop.com. Other avenues you may be able to try Nol; would be using a bandsaw or other mechanical saw fitted with a bimetallic blade suited to the cutting of copper alloys, or industrial engineering firms dealing with alloys use a number of tools to do it:
Shearing
Electrical discharge machining (EDM)
Laser cuttingWater jet cutting
Plasma cutting
Slitting
Guillotining
Abrasive disc cutting
Okay 2 hours inthe basement last night to cut the first slab. Whew. And now I cant braze it. I also decided these caps are way to big and I'll get some smaller ones.
PV, nice find dude... I'm going to have to look in to that for some ideas of mine, w00t w00t! :wavey:
:D Glad you found some use for the link Fraggles, they seem to have a very comprehensive setup. I hope it goes well for you mate:)
Diamond bladed angle grinder tbh, do the job fine, you'll just need some good eye protection and a good pair of gauntlets. Or alternatively, a cutting torch or as Frag says, an Arc (plasma) cutter.
I had a diamond blade on a sawzall trying to cut through .120 DOM tubing. took me an hour or so and i broke about 4 blades and totally wore about 3 of them.
RollerCam540
P.S.
SPARKS!
RollerCam540
P.S.
SPARKS!
lol, nah you want an angle grinder, not a sawzall.
PS
Hence the eye protection and gauntlets ;).
PS
Hence the eye protection and gauntlets ;).
CSS Valid
[IMG]http://www.dialmfg.com/Tubing/43353672.gif[/IMG] [IMG]http://www.dialmfg.com/Tubing/434972.jpg[/IMG]