Intel set to release two new quad core CPU's in Q3 2008

"Its been reported that we are to see two more 45nm quads in Q3 of this year"

Search News

  • Scrolling Image
 
Core 2 Quad logoIntel to release the Q9400 and Q9650 in Q3 2008


The guys at Fud today reported that Intel are set to release two new 45nm Yorkfield based quad core CPU's to their line up in Q3 this year.  So sometime between July and September we should have a couple more reasonably priced quads to choose from, the Core 2 Quad Q9400 and Core 2 Quad Q9650.

Like they did with the old Extreme QX6700, Intel have decided to drop the X to make a more mainstream version of their beastly QX9650.  The Core 2 Q9x50 model name means that the CPU will be loaded up with 12MBs of L2 cache memory and this particular version will be clocked at 3.0GHz running on a 1333MHz front side bus.  The main difference from the Extreme version will be that it doesn't have an unlocked multiplier, that and the fact it will only cost somewhere in the region of $525 at launch compared to the current price of the QX9650 at £615 ($1040).
 
While there were reports in february that the Q9650 was to be released later in the year, no prices were mentioned. If this information is (relatively) correct then it's not a bad price at all.
 
As for the Q9400, this CPU will cost around $268 at launch, which is about $75 less than the Q9450 currently sells (if you can get a hold of one) but more interestingly, its about the same price as the Q9300 can be had for now.  The Q9400 will come clocked at 2.66GHz and will also run on a 1333MHz front side bus.  While it looks pretty much the same as the Q9450, the difference is that CPU's with the Q9x00 model numbers have the 12MBs of L2 cache seen in the Q9x50 range cut in half down to 6MBs.  It's not that the memory isn't there, it's just been disabled.
 
It's possible that these two could be the last 45nm quads to be released before we see Nehalem.  But with Intel being Intel, that could easily change.
 
 
Would you be tempted to splash a little extra cash on the Q9650 or buy a Q9400 to save some pennies for other upgrades?
 
Let us know what you think of these CPUs in our forum.
«Prev 1 Next»

Most Recent Comments

25-04-2008, 10:38:57

wigseryc
Helloooo all.

Notsolong ago i bought myself an Xtreme Music X-Fi card, and yesterday, after a bit of Googling and asking around, i tried to hook up the front panel to the card.

Now i found out that attatching the panel pins to the "Proprietry Connector" would sort me out, however, my case pins were far too long to even make contact with these jumpers..

here's what i'm talkin' about, near the back panel.




Has anyone else ever come across this? Are there any adapters or anything i can buy?

I'm relatively ill-equipped at the moment, student flat with buggar all for tools in it, y'know..? So DIY is a bit of a no-no at the mo-mo.


Danke.

25-04-2008, 11:05:29

Daza
There are cables available you've just got to look very hard I was searching for the same thing a while back bust gave up as I now use an amp for my headphones.

This might help; http://www.xtremesystems.org/forums/showthread.php?t=98445

And http://img482.imageshack.us/my.php?image=xfifpmodbq5.jpg

And http://www.mchcustomcomputers.com/audigyxficables.htm

25-04-2008, 11:12:42

Rastalovich
hehe got 2 laying on the desk in front of me for HP DC series.

They`re kinda half the job tho, cos u need the hp connector on the case to plug into it, incorporating the standard hp onboard connector.
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.