Bitfenix Shinobi XL
"Bitfenix are supplementing their lineup with a XL-ATx Chassis..."
Published: 19th January 2012 | Source: Bitfenix |
Bitfenix today announced their new Chassis, the Shinobi XL.
This monstrously sized chassis should provide ample room for even the biggest motherboards, plenty of airflow for air cooled rigs, and you should be able to squeeze a good rad or two in there, ...here's what Bitfenix have to say:
The BitFenix Design Lab is proud to announce the release of the follow-up to our award winning Shinobi gaming chassis - Shinobi XL. A full tower design with full XL-ATX compatibility, superior water cooling support, and our exclusive BitFenix SuperCharge port.
Check out some of these great features:
- Classic Shinobi Styling – Same sleek modern design of BitFenix Shinobi mid tower
- Superior Watercooling Support – Fits 360mm radiator on top, and 360mm in front or 240mm on bottom
- XL-ATX Compatibility – Fits the latest XL-ATX motherboards with 9 PCI slots
- BitFenix SuperCharge™ Port – Supplies up to 2.5A for charging mobile devices
- Four SuperSpeed USB 3.0 Ports – Two 20-pin internal connectors with included 9-pin header for USB 2.0
- BitFenix FlexCage™ Hard Disk Rack – rotate or remove for ultimate flexibility
- BitFenix Spectre™ Cooling – Two 230mm and one 120mm Spectre™ fan included
- BitFenix SofTouch™ Surface Treatment – luxurious matte finish and soft feel
- Hassle-free Installation – Tool-free drive locking mechanisms, rubber grommets and filtered intakes
Discuss in our Forums
Most Recent Comments
I can't see why we won't.
Awesome can't wait
Hope they release a windowed version(or a window kit). Would be bonkers if they didn't considering all the water cooling support it has.
Didn't Tom already announce that a window panel without a fan grill was going to be released?
Didn't Tom already announce that a window panel without a fan grill was going to be released?
i believe he was expressing to the reps that the public would not mind either the implementation
or option of a windowed panel be available, even hed be in that line to purchase one
the modding explosion is growing with the like of TTL, YouTube, Facebook and all social media
to be creative. and the manufacturers are watching, noting ideas and processes. but it does
take time to "roll-out" special items from design, manufacturing, marketing and cost.
ive been there in manufacturing and its tough to predict and engage mfg processing on the fly.
research and cost analysis are the big time eaters. other than that a guess and thick-skin is
another way...
airdeano
i believe he was expressing to the reps that the public would not mind either the implementation
or option of a windowed panel be available, even hed be in that line to purchase one.
the modding explosion is growing with the like of TTL, YouTube, Facebook and all social media
to be creative. and the manufacturers are watching, noting ideas and processes. but it does
take time to "roll-out" special items from design, manufacturing, marketing and cost.
ive been there in manufacturing and its tough to predict and engage mfg processing on the fly.
research and cost analysis are the big time eaters. other than that a guess and thick-skin is
another way...
airdeano
You make it sound like I accused BitFenix of slacking xD I was just saying that I thought I'd heard Tom saying that they already had the windowed panel in production, but I might not remember correctly..
Didn't Tom already announce that a window panel without a fan grill was going to be released?
They had promised this but might not be changing it now.
Ill openly state this is a very bad move if they do and Ill be dropping it down an award level just because of that tbh. They have had enough time to get this sorted and EVERYONE hates the fan grills in the windows.
Its about time they start listening.....
Otherwise, Lester will get in touch with you
CSS Valid
Sweet