Aqua-Pcs becomes only UK distributor and reseller for CoolIT

"Aqua-Pc's has become the only UK destributor and reseller of CoolIT Systems' products."

Search News

  • Scrolling Image
  • Scrolling Image
Official Press Release

Aqua-Pc's gains exclusive UK distribution and reseller deal with CoolIT Systems

Riding high on their recent success at being named the Official Launch Partner for Blowfast cooling products , Aqua-Pc's has again usurped the competition by being named as the only UK distributor and reseller for CooIT Systems products.

CoolIT Systems' range of cooling solutions uses patented MTEC technology, and their popularity amongst PC enthusiasts is well known. Let's hear what CoolIT have to say about their products:

"The only thing better than liquid is chilled liquid. CoolIT products do not use a radiator, but rather a patented technology called MTEC. By using MTEC technology, the liquid is actually refrigerated (using multiple TECs or Peltiers) then used to cool even the hottest processors in today’s computing devices. The result is unparalleled overclockability, reduced system level noise and increased reliability. In addition to providing superior performance to water cooling, the CoolIT products are pre-plumbed, factory sealed and maintenance free allowing for very simple installation and worry-free."

Specialising in a range of cooling solutions, CoolIT are particularly well known for their CoolIT Eliminator and Freezone products, and their highly anticipated CoolIT Elite. However, CoolIT also stock a considerable range of cooling accessories worthy of a home within your PC.

CoolIT Eliminator CoolIT installed

Want to see the range that Aqua-Pc's have to offer? Then head straight to their CoolIT product page here

Feel free to discuss CoolIT products with Aqua-Pc's here

Congratulations Aqua-Pc's on acquiring an exclusive UK distributorship and reseller license for CoolIT Systems' products.
«Prev 1 Next»

Most Recent Comments

20-09-2007, 06:06:19

NugentS
I have a coolit freezone that I am not using atm.

Would that help. The only problem - and one I haven't got around to fixing is that its missing one of the CPU mounting kits - the one for the C2D that I put in a safe place and never found again...

Sean

20-09-2007, 15:25:07

Aqua-Pc's
I can now confirm that we have the following:

Freezone CPU Cooler
Eliminator CPU Cooler
Ram Fan Cooler
PCI Cooling Booster
USB Beverage Chiller

Being fedex'd to us as we speak - we will have these in for testing next week, if all the unit meets our quality control and tests then we will be putting them in to stock at the end of the week :):p we have also insured the OC3D get Priorty review items so they can test these to :)

20-09-2007, 15:50:15

NugentS

I can now confirm that we have the following:

Freezone CPU Cooler
Eliminator CPU Cooler
Ram Fan Cooler
PCI Cooling Booster
USB Beverage Chiller

Being fedex'd to us as we speak - we will have these in for testing next week, if all the unit meets our quality control and tests then we will be putting them in to stock at the end of the week :):p we have also insured the OC3D get Priorty review items so they can test these to :)



Can you get me a new mounting kit - if I give you the correct part letter?

Sean

20-09-2007, 18:15:40

Aqua-Pc's
Should be no problem if you can get me the part number asap might even get it out tomorrow with the testing pack :p

21-09-2007, 04:15:44

NugentS

Should be no problem if you can get me the part number asap might even get it out tomorrow with the testing pack :p



You know that thing that happens when when you loose something, can't find it anywhere and then eventually give up and stop looking....

I found it

Sean

21-09-2007, 04:45:25

Aqua-Pc's
no worries - i got them to throw one in just incase anyway tho ;)

24-09-2007, 13:28:05

Aqua-Pc's
[IMG]http://upload.overclock3d.net/get.php?id=3798[/IMG]

:rolleyes: :D

24-09-2007, 15:36:01

bullcrew



:rolleyes: :D



Hey thats the freezone elite isnt it!
Coolits rock, I am running a 1.56 volt to my cpu for OC testing and I am keeping the cpu at 56 degrees under load now. Thats alot of cooling for that amount of heat.

My thermal AS5 seated finally and shwoop! down went the temps. I ran prime 95 3 hours small ftts and it reached a max of 56 degrees on 2 and 48 on the others. Held just fine.

Looking forward to your results remember to give it a little bit for the thermal to cook. Keep us posted!!!

24-09-2007, 19:42:55

Aqua-Pc's
I havent been able to get an Elite just yet thats the bog standard Freezone and eliminator in the pics :D

I do like the build quality of the stuff - very well made.

24-09-2007, 22:20:16

bullcrew

I havent been able to get an Elite just yet thats the bog standard Freezone and eliminator in the pics :D

I do like the build quality of the stuff - very well made.



Your going to love the stuff! I fiddle with mine and it rocks as well as theres a ton of different ways to do fan configurations in a case to make it more effective. Its not limited to "as it sits" It can be adjusted with case fans as well to lower temps.

Put it up and lets see some pics!!!! BTW nice site water boy!!! Very cool! No pun intended!:D
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.