OC3D Reviews ›› PSUs
PSUs | 30th January 2007
Just over 3 months ago we had the oportunity to review Silverstone's upgraded 750w model of their original 600w Strider PSU. Today we're back again to see what their latest 850w model has to offer.
PSUs | 14th December 2006
Having already reviewed a couple of 1000w+ units on the market, it seemed necessary to get hold of one of Enermax's Quad-SLI beasts to put through its paces. Does the Galaxy deserve all the attention it's been getting recently, we find out.
OC3D Articles ›› PSUs
James Napier | 8th November 2006
Overclock3D in association with Silverstone are offering every OC3D forum member the chance to win a top-end 750w Strider modular PSU. All you have to do is answer a simple question!
Dave Stevens | 14th October 2006
ThermalTake Release the Toughpower 850W PSU
Matthew Fogg | 6th October 2006
Mushkin Adds New 800Mhz Module To HP Lineup
PSUs | 24th November 2006
Today I'll be taking a look at a Quad-SLI certified unit from a little known company called Etasis. Will this unit be able to withstand the OC3D PSU testing equipment? We find out..
PSUs | 17th November 2006
OCZ already impressed us a couple of months ago with their 700w GameXStream PSU. Will the 850w version be just as good? Let's find out...
PSUs | 14th November 2006
After being blown away by Zippy Emacs' 600w single railed bad boy, it was time to bite the bullet and put the 850w model on our test bed. How did it perform? Read on to find out...
PSUs | 8th November 2006
Seasonic are known for their range of silent and stable power supplies. The M12 is one of their latest models, and their first entry into the modular scene. How does it perform? We find out...
PSUs | 30th October 2006
What do you get when you cross a OCZ PowerStream with an ModStream? An EvoStream of course! Today I'll be testing out OCZ's latest addition to their PSU range that is set to take the place of the ageing ModStream unit.
Llwyd Johnson | 16th August 2006
Dell to recall 4 million batteries
Matthew Fogg | 30th June 2006
New enthusiast PSU hits the market
James Napier | 29th April 2006
In this guide i will be showing you how to volt mod the Tagan Easycon PSU. The end result will be higher voltages under load on the +12v rails of the PSU. This guide may also apply to other Tagan models.