OC3D Reviews ›› Cases & Cooling
Cases & Cooling | 6th March 2012
Latest in the SUGO line of Small form factor cases from Silverstone, The SG08 steps up to the OC3D mark ready to be measured.
Cases & Cooling | 1st March 2012
NZXT released the Switch just after CES, we finally get our hands on one and tell you if its worth all the fuss.
OC3D Articles ›› Cases & Cooling
Adam Ferrol | 12th December 2012
Ace_Finland has posted an epic project log in the OC3D Forums based around the Cooler Master Test bench!
Tom Logan | 19th September 2012
We see what happens if you strap 40 fans to a H100... Ultimate Cooling Mod?
Tom Logan | 23rd August 2012
It seems like it has been ongoing for months already but it is finally time to take a look at the plans for the Orca Project
Cases & Cooling | 23rd February 2012
Not just a review but also a watercooling guide for the newly revamped Cooler Master 690 II Advanced.
Cases & Cooling | 20th February 2012
With the Gigas Xigmatek try their hand at an enclosure for the smaller form factors.
Cases & Cooling | 13th February 2012
The original TJ04 was released back in 2004 and has enjoyed critical acclaim. So with the suffix of an "E" (for Evolution) can Silverstone improve on what is considered by many to be a modern classic.
Cases & Cooling | 30th January 2012
Sporting 4x8mm heat pipes and twin 140mm fans the Xigmatek Prime should do well in the torture tests. Lets see if it's all mouth and no trousers.
Cases & Cooling | 25th January 2012
It's no coincidence that ProlimaTech, well known for their range of performance CPU and VGA cooling solutions, should also produce a range of fans. Here we take a look at the entire Vortex range.
Gary Wain | 20th July 2012
We've selected our kit, we've planned, we've modded. Now it's time for G-Dubs to bring everything together.
Tom Logan | 17th July 2012
We give the Noctua NH-L12 a quick overview whilst upgrading one of our home servers. Can the L12 be cool and quiet?
Gary Wain | 11th July 2012
G-Dubs gets his dremel out and makes some slight adjustments to the NZXT Phantom 410 case
Tom Logan | 4th July 2012
Scared to break the screw drivers out and fit your GPU with a waterblock? We show you how easy it really is.
Tom Logan | 4th July 2012
We show you how to mod the CM Storm Trooper or Stryker for a 360mm radiator in the roof!
Gary Wain | 4th July 2012
In the first article we showed you the hardware and gave you a rough idea of what we wanted to do. Getting down to business we now strip the case down and go into a bit more detail about our plans for the hardware and cooling.