OC3D @ i45 Spring Event

The Gaming Hall

OC3D @ i45 Spring Event

The Gaming Hall

The majority of players are in the gaming hall, and it's everything you would expect it to be. If there is one thing that really emphasises how enormous Insomnia has become, it's the bottom right picture of this quartet. People and monitors as far as the eye can see. This is no "ten people in a shed" event.

OC3D @ i45 Spring Event     OC3D @ i45 Spring Event  

OC3D @ i45 Spring Event     OC3D @ i45 Spring Event  

If you're in the electricity business, or someone who sells CAT6 cabling, then this is manna from heaven. Even the quiet areas of the show are heaving with gamers and tech-heads.

OC3D @ i45 Spring Event     OC3D @ i45 Spring Event  

Of course gamers run on two things, caffeine and carbohydrates. Kick Energy were there to give all the liquid energy that heavy gaming sessions require, and the local pizza parlour ensured nobody went hungry. It's a bit of a stereotypical photo, but there isn't time to prepare poached salmon so we make the best of things.

OC3D @ i45 Spring Event     OC3D @ i45 Spring Event  

«Prev 1 2 3 4 5 6 7 8 Next»

Most Recent Comments

29-04-2012, 18:43:11

Cram
Hi all i was just reading the asus motherboard P8Z77-V Deluxe user guide and in there it says that this motherboard does not support DIMMs made up of 512Mb (64MB) chips or less (Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).

So my Question is which ram would you buy?

All help welcome

29-04-2012, 19:31:16

S_I_N
best look on the ram compatability list on Asus's site. I watched a video a lil bit ago where they claim they now are using future spec from intel for an upcoming change in chip design that allows more bandwidth. This vid said when they did their testing on the Z77 boards they used 2800 speed for all testing as a norm without any difficulties.

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_DELUXE/P8Z77-V-DELUXE-QVL-0405.pdf

29-04-2012, 19:46:20

Cram


best look on the ram compatability list on Asus's site. I watched a video a lil bit ago where they claim they now are using future spec from intel for an upcoming change in chip design that allows more bandwidth. This vid said when they did their testing on the Z77 boards they used 2800 speed for all testing as a norm without any difficulties.

http://dlcdnet.asus....XE-QVL-0405.pdf




Thank you sin, I was looking at these what do you think http://www.crucial.c...1A62B7DA5CA7304 and these [url="http://www.shop.bt.com/products/corsair-memory-16gb--4x4gb--vengeance-performance-ddr3-1600mhz-cl9-7DNR.html?utm_source=google&utm_medium=product+search&utm_content=RR00"]http://www.shop.bt.com/products/corsair-memory-16gb--4x4gb--vengeance-performance-ddr3-1600mhz-cl9-7DNR.html?utm_source=google&utm_medium=product+search&utm_content=RR00[/url]

29-04-2012, 20:42:47

S_I_N
the vengance over the balistics mainly due to cost difference the 2x8gb kit is twice the 4x4gb kit. But both are great ram. But question knowing that the board you picked will do up to 2800 speed why get 1600???

30-04-2012, 03:08:19

Josh Weston


the vengance over the balistics mainly due to cost difference the 2x8gb kit is twice the 4x4gb kit. But both are great ram. But question knowing that the board you picked will do up to 2800 speed why get 1600???



You begin to pay a premium when you go above 1600, and, unless you're really into your rendering etc, I doubt you'll see much difference from 1600 RAM. A decent set of 1600 RAM can usually be overclocked a little higher, anyway.

30-04-2012, 03:21:05

I Hunta x
My first question is do you even need 16gb of RAM?

If something other than "100% yes because ....." then something like this would be a better choice imo.

[url="http://www.aria.co.uk/Products/Components/Memory+-+RAM/DDR3/Dual+Channel+-+%281600MHz%29/8GB+Mushkin+Enhanced+Blackline+Frostbyte+%23996995+%282x4GB%29+1600+%28PC3-12800%29+240-Pin+DDR3+SDRAM+CAS+9-9-9-24+1.5V+?productId=44336"]http://www.aria.co.u...productId=44336[/url]

30-04-2012, 08:15:57

Cram






Hiya is that ram 1024 x 64 or is it 512 x 64

30-04-2012, 15:50:22

Cram


You begin to pay a premium when you go above 1600, and, unless you're really into your rendering etc, I doubt you'll see much difference from 1600 RAM. A decent set of 1600 RAM can usually be overclocked a little higher, anyway.




Your absolutely correct, especially when your looking for 1024Mb X 64 ram :banghead:

30-04-2012, 16:04:19

The_Protocol
Yes, what are you actually using the rig in question for? Unless you're gaming at huge resolutions or doing extreme rendering/ editing work then there is no reason to buy anything other than value RAM. I'd vouch for 2GB 1333Mhz CL9 Crucial Rendition at 7 a stick.

In the event someone is upset about spending a fortune on 8 sticks of 4GB 2133Mhz after reading the above, let me say that I have personally tested RAM frequency and latency and a whole multiplier bump or CAS increment decrease (eg. CL9 to CL8) will only earn you an extra 0.02pts under Cinebench R11.5 x64. tested on a 1090T and Formula IV with 2x 4GB of 1333Mhz CL9 Corsair.

01-05-2012, 08:39:02

magicc8ball
Hell I bought some mushkin black line ridgebacks 2000mhz 8gig kit for 79.99 usd. It is CAS 9 so it will be plenty fast for what I do.

As others have stated when you get up to the 2133 you will be spending at least a 100 for a decent 8 gig kit and if you really want some nice ram be prepared to spend in upwards of 140 on up usd.
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.