Basic Overclocking Guide for Intel C2D Processors

Set Your RAM Timings

RAM Timings

Ram timings are key to a fast, stable overclock on any computer with any processor. What we need to make sure of before we start overclocking is that we loosen up the timings slightly to factor out the possibility of the RAM's timings being to tight to allow a higher overclock. This is going to be different with every single setup and each different kit of RAM. I have found that the best settings to start with are usually 5-5-5-15 as this is loose enough to allow a good bump in memory speed without hitting a wall.

On the AW9D-MAX the timings page can be found under "Advanced Chipset Features".

RAM Timings


Make sure that you select "Manual" so that you have control of the timings and not your motherboard. This specific board will try and automatically scale the RAM timings with the FSB/Memory speed which is bad when trying to overclock. As you can see from this screenshot I've decided to lower my timings to 4-4-4-10 which are my tightest stable timings at 445mhz FSB with 2.2vdimm. Again, I suggest timings of 5-5-5-15 to start off with and then gradually tighten them after you've achieved your maximum stable overclock.

Note for Asus P5W DH Owners: This motherboard has an FSB wall at 330mhz which can be overcome by enabling SPD in the advanced chipset features page.

Now, think you're ready to start clockin'? Let's get you familiarized with the settings first...
«Prev 1 2 3 4 5 Next»

Most Recent Comments

27-11-2007, 18:48:32

rob82
got myself i CPU INIT on my Srtiker extreme and dnt kno wat 2 do

got 2.66 core 2 duo
2gig ram
8800 gtx
all the stuff worked on my last pc its just the new motherboard, CPU, case (thermaltake kandalf) and a Tagan 900w PSU.


plz some 1 help

28-11-2007, 13:47:58

Luigi
if you goto the asus forums its all there, poor you for buying the mobo, its nothing but trouble believe me !!

29-11-2007, 14:31:43

rob82
ok thxs anyway hope it can help me damn that asus striker extreme

29-11-2007, 19:30:17

tsinc80697
I had this problem, along with memory problems, I jsut RMA'd the board and sold it when it got back!
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.