CKC Coolermaster Koolance Cosmos

CKC Coolermaster Koolance Cosmos Custom Build

CKC Coolermaster Koolance Cosmos 


Coolermaster Koolance Cosmos 

One of the reasons we have decided to add the Articles section to the OC3D front page is to let you see some of the things we get up to over at OC3D.tv that dont always grace the pages of the main OC3D site. One of our current projects is a case build in a Coolermaster Cosmos 2 filled with some awesome Koolance water cooling, add to this an Asus Rampage IV Extreme and a pair of Asus 7970's and we already have the makings of what many would call their dream system.

Here is the introduction video for you all to see what goodies we have to play with:

 

So with a dream spec list and a the Koolance kit bundled hereshould you want to buy your own, first up we tackle fitting the Rampage water blocks.

Stay tuned for future updates, coming soon we will have the 7970 waterblock fitting guide, then its time to see how the radiators are going to go into the case before we move on to getting the hardware in!

The case and all the watercooling parts plus many many others are all available from Specialtech.

You can discuss this article in our community forums.

«Prev 1 Next»

Most Recent Comments

10-04-2012, 10:06:03

tinytomlogan


SpecialTech we put together a a system to show you whats possible with a Cosmos 2 and a hoard of Koolance products.

Continue ReadingQuote

10-04-2012, 12:02:49

Tharionos
another great proof to an awesome case

thanks for sharing with us TTL !

keep up the good workQuote

10-04-2012, 12:49:59

SieB
This is the best project build we have had for a while, looking forward to seeing this all finished. Quote

10-04-2012, 13:11:01

PetrolHead247
I love this build, it's going to look epic. Love the Koolance stuff too, their waterblocks look fab.Quote

14-04-2012, 07:30:15

RenaatVH82
Realy looking forward to any and all updates for this build.

Just happens that I recently bought a sabertooth X79 board, i7 3820 CPU, AX750 power supply and cosmos II case.

Looking to start my first water cooling build and I have to admit ... I will be using some of these parts you use and as such ..

copying your build slightly Quote

14-04-2012, 09:13:51

Damien c
Quote:
Originally Posted by RenaatVH82 View Post

Realy looking forward to any and all updates for this build.

Just happens that I recently bought a sabertooth X79 board, i7 3820 CPU, AX750 power supply and cosmos II case.

Looking to start my first water cooling build and I have to admit ... I will be using some of these parts you use and as such ..

copying your build slightly
Don't try to fit a 60mm deep rad in the roof of the cosmos 2 as it wont fit I found that out, but if you have a small length power supply and get abit creative with hard drive arrangements it should fit in the bottom which is where I will be looking to fit mine over the next few weeks or months.Quote

15-04-2012, 13:57:31

sharps_87
Nice vids! I like the increase in watercooling reviews/videos you've done recently.Quote

18-12-2012, 14:07:11

Skoubo
Hi Guys.

I just completed my build that is very much like this one just except for the watercooling bit.
My part's are: Cosmos 2 ofc., asus rampage 4 extreme, Intel 3970x cpu, 32gb corsair dominator platinum 1866, corsair h100 cooler, 2 club3d 7970 Ace edition, creative fatality soundcard, 1 samsung 840 pro 256gb ssd drive and 2 3tb seagate barracuda drives and a corsair ax1200i powersuply.

My problem is this: when i try to overclock my cpu just to gamers overclock my computer reboots ofc but it does not boot up, its like it looking for the gpu so it's shuts down then i have to shut Down the powersuply for a few seconds and the i can get in the bios and set it to stock again and the it works.
The other problem is when i get to work at stock levels and try to do 3dmark vantage for a simple P-score run it freezes and i have to reboot.

So guys please help me and yes i'm a noob.
Looking forward for you reply's

Best regards

MartinQuote

19-12-2012, 02:02:18

Skoubo
Oh and the power suply is a corsair ax1200i.Quote

19-12-2012, 02:23:09

airdeano
Quote:
Originally Posted by Skoubo View Post
Hi Guys.
My problem is this: when i try to overclock my cpu just to gamers overclock my computer reboots ofc but it does not boot up, its like it looking for the gpu so it's shuts down then i have to shut Down the powersuply for a few seconds and the i can get in the bios and set it to stock again and the it works.
The other problem is when i get to work at stock levels and try to do 3dmark vantage for a simple P-score run it freezes and i have to reboot.
martin, have you just tried benching it stock, no overclock?
what overclock are you trying to achive?

but obviously, all the latest drivers and system support is installed.

i'd say you have some sheer instability. even a stock freze suggests some
incompatibilty or defect. try just two sticks of RAM and retest. a prime 95 load
for 12hrs on blend should weed out RAM issues. MEMTEST86 sometimes cant
find a deep flaw.

airdeanoQuote

19-12-2012, 04:03:24

Skoubo
when i tryed the bechmark it was at stock. I have updated the bios and grafic's so everything should be up to date. when i see the rams it only shows 24gb so could it be that one of them is not installed correctly or that its defect?Quote

19-12-2012, 04:04:53

tinytomlogan
What deano meant to say was this is the wrong section for this question and we would need more details about what you are trying to achieve, its likely to be user error than anything else.Quote
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.